Front speaker wiring kit (for amp with factory radio)
BEFORE ORDERING VERIFY PART COMPABILITYVIEW INSTALLATION INSTRUCTIONS
$27.00
Out of stock
VIEW INSTALLATION INSTRUCTIONS
$27.00
Out of stock
Would you like to keep your factory radio, but have an easy, no-cut way to install an amplifier? We have the solution with this front speaker wiring kit. Utilizing connectors that are already on your Voyager or Vaquero, these can be routed to feed the amplifier and then routed the send that new, upgraded power to your speakers! Works with factory or aftermarket speakers!
If you are installing an aftermarket radio, you’ll want to try our wiring harness plug instead!
| Tech Specs | |
|---|---|
| Materials | Copper wiring |
You must be logged in to post a review.
Harry Tom (verified owner) –
Excellent product which made installation very easy.
Bit difficult to understand proper use in text so here is my shot at explaining the procedure (for a Vaquero)
After removing front cowl, follow procedure for both speaker connections:
1. Disconnect speaker from the wire harness (which connects to the head unit) and set speaker side connected wire to the side
2. Connect head unit side connected wire to one end of the Engineered Adapters (EA) cable. (only one side will fit )
3. Cut other end of the EA cable to desired length to reach (and splice into) the appropriate Molex amp INPUT connector. The connector at the other end of the cut cable will be used to connect to the speaker harness (going to speaker). Molex connectors for both input and output should come with your amp
4. After connecting the cut cable connector to the speaker harness, splice the other end’s wires to the appropriate Molex amp OUTPUT connector wires.
5. Hook up power and ground to finish amp install.
So basically you’re cutting the EA cables as one end enables head unit connection to the amp and the other end allows amp output to the speakers.
Thanks Randy!
aedgell25 (verified owner) –
This wiring kit made for simple plug and play with my amp. I was able to use the factory speaker plug ins, and after cutting the end 2 channel plug in piece, I could splice the connectors to the ones that came with my amp and it all worked nicely together. All in all I would absolutely recommend this product to anyone who is looking to upgrade their Kawasaki Vulcan 1700 Vaquero as it made my life a lot simpler. The owner is also very responsive and willing to help anyone who has questions even looking at pictures you send to try and diagnose a problem with made me feel a lot more confident in doing this myself.